Tigercat
E625C
Skidder
23 specifications

122 data points
| Operating Weight | 24 lb |
|---|---|
| Transmission Fluid Capacity | 32.5 gal |
| Steering Angle | — |
| Operating Voltage | — |
| Alternator Supplied Amperage | — |
| Fuel Capacity | 14.8 gal |
| Cooling System Fluid Capacity | 7.7 gal |
| Tire Size | 10.3 |
| Rear Diff Fluid Capacity | 14.3 gal |
| Engine Oil Capacity | 13.8 gal |
| Front Diff Fluid Capacity | 19.6 gal |
| Engine Model | 225 |
|---|---|
| Power Measured @ | 638 rpm |
| Gross Power | 200.0 hp |
| Aspiration | 40161.7 |
| Torque Measured @ | 100 rpm |
| Stroke | 200 in |
| Bore | 6 in |
| Air cleaner | 24V |
| Gross Power - SAE J1995 | 200.0 hp |
| Net Power - ISO 9249 | 198.0 hp |
| Net Power - SAE J1349 | 225.0 hp |
| Net Power - EEC 80/1269 | 200.0 hp |
| Net Flywheel Power | 10,663.2 hp |
| Derating Altitude | 26,400 in |
| Electrical System | 2 |
| Fan Speed | Enclosed wet disc rpm |
| Battery Capacity | Blower |
| Battery Quantity | 12 V |
| Fan Type | Direct electric |
| Governed Speed at Rated Power | Dry precleaner rpm |
| Battery - Volts | 950 CCA |
| Maximum Torque at Rated Speed | 1,981 |
| Open ROPS | axial piston lbs (0.00 kg) |
|---|---|
| Tires - 24.5 x 32, 16 PR | 5,190 lb |
| Arch - Cable Skidding | 2,630 lb |
| Decking Blade | 2,651 lb |
| Enclosed ROPS + AC | 2,360 lb |
| Winch | 2,100 lb |
| Relief Valve Pressure | 13 psi |
|---|---|
| Pump Type | 3045 |
| Relief Valve Setting | — |
| Circuit Type | direct link non-follow |
| Pump Output | 17.0 gal/min |
| Dozer Cylinder - Bore | 34 in |
| Dozer Cylinder - Rod Diameter | 3 in |
| Dozer Cylinder - Stroke | 2 in |
| Dozer Valve | 4 |
| Grapple Valve | 50 |
| Reservoir Tank Capacity | 11.1 gal |
| Steering Cylinder - Bore | 17 in |
| Steering Cylinder - Rod Diameter | direct linkage in (0.00 cm) |
| Steering Cylinder - Stroke | 2 in |
| Steering Valve | 4 |
| Height - Top of Cab | 24 in |
|---|---|
| Overall Length | 134 in |
| Overall Width | 133 in |
| Wheel Base | 1,198 in |
| Drum Diameter | 11 in |
| Length | 151 in |
| Drum Capacity at Cable Width | 542,240 in |
| Max Line Pull - bare drum | 361 lb |
| Cable Width | 148 in |
| Max Blade Height | 16 in |
| Blade Width | 988 in |
| Grapple Capacity - tongs tip to tip | 3.99 yd³ |
| Max Line Speed | 0.1 mph |
| Max Speed - Forward | 11.6 mph |
|---|---|
| Number of Reverse Gears | 17 |
| Transmission Type | 5 |
| Number of Forward Gears | 3 |
| Ground Contact Area | — |
|---|---|
| Length of Track on Ground | — |
| Brakes - Parking Type | Full Hydraulic Control |
|---|---|
| Brakes - Service Type | Drum |
| Maximum Drawbar Pull | 4 lb |
| Steering, Frame Articulation | 43,763 |
| Torque Converter Type | 44,600 |
| Transmission Cooler Type | 5fwd/3rev countershaft powershift |
| Travel Speed - Forward 1 | 5.6 mph |
| Travel Speed - Forward 2 | 6.8 mph |
| Travel Speed - Forward 3 | 9.5 mph |
| Travel Speed - Forward 4 | 3.9 mph |
| Travel Speed - Reverse 1 | 6.5 mph |
| Travel Speed - Reverse 2 | 11.6 mph |
| Travel Speed - Reverse 3 | Plate mph (0.00 kph) |
| Transmission Cooler Location | Rotating housing single stage |
| Transmission | 17.1 |
| Torque Converter - Model | Lower tank radiator |
| Travel Speed - Forward 5 | C484-E3611 AAA |
| Fuel Tank | 13.7 gal |
|---|---|
| Cooling System | 32.0 gal |
| Engine Oil | 17.0 gal |
| Hydraulic System - Total | 7.0 gal |
| Differential - Final Drives - Front | 19.6 gal |
| Differential - Final Drives - Rear | 14.0 gal |
| Mechanical Winch | 14.8 gal |
| Transmission - Torque Converter | 6.6 gal |
| Hydraulic System - Tank | — |
| Drum Capacity - 19.0 mm (3/4 in) | 120 in |
|---|---|
| Drum Diameter | 11 in |
| Maximum Line Pull - Bare Drum | 360 lb |
| Maximum Line Speed | 1.7 mph |
| Drum Capacity - 22.2 mm (7/8 in) | 984 in |
| Drum Width | 106 in |
| Arch Types | 51 |
|---|---|
| Dual Function - Lift Highest, Farthest | 109 in |
| Dual Function - Lift Highest, Retracted | 15 in |
| Dual Function - Lift Lowest, Farthest | 51 in |
| Dual Function - Lift Lowest, Retracted | 105 in |
| Dual Function - Lift Maximum Reach | 74 in |
| Dual Function - Reach Highest, Farthest | 62 in |
| Dual Function - Reach Highest, Retracted | 107 in |
| Dual Function - Reach Lowest, Farthest | 71 in |
| Dual Function - Reach Lowest, Retracted | 125 in |
| Dual Function - Reach Maximum | 76 in |
| Bunching - Tip to Tip Height | 128 in |
|---|---|
| Sorting - Tong Opening | 17 in |
| Sorting Capacity | 18,019.80 yd³ |
| Bunching - Full Open Height | 48 in |
| Bunching - Fully Closed Height | 5 in |
| Bunching - Minimum Stem Diameter | 86 in |
Other skidders/yarders in a similar weight class.