Caterpillar
D6N XL
Crawler Dozer
62 specifications
59 data points
| Engine Model | Cat C9 ACERT |
|---|---|
| Displacement | 537 in³ |
| Gross Power | 213.0 hp |
| Stroke | 6 in |
| Bore | 4 in |
| Net Power - ISO 9249 | 185.0 hp |
| Net Power - SAE J1349 | 183.0 hp |
| Flywheel Power | 185.0 hp |
| Net Power - EU 80/1269 | 185.0 hp |
| Net Power - Caterpillar | 185.0 hp |
| Ground Clearance | 16 in |
|---|---|
| Track Gauge | 74 in |
| Length - Track on Ground | 105 in |
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 23 in |
| 2 Forward | 4.1 mph |
|---|---|
| 3 Forward | 7.1 mph |
| 2 Reverse | 5.2 mph |
| 3 Reverse | 9.1 mph |
| 1 Forward | 2.3 mph |
| 1 Reverse | 3.0 mph |
| Ground Pressure | 7 psi |
|---|---|
| Track Gauge | 80 in |
| Ground Clearance | 16 in |
| Grouser Height | 3 in |
| Fuel Tank | 112.0 gal |
|---|---|
| Cooling System | 18.5 gal |
| Final Drive - Each | 3.6 gal |
| Hydraulic Tank | 13.6 gal |
| Engine Crankcase | 7.4 gal |
| Power Train | 38.5 gal |
| Pivot Shaft Compartment | 1.3 gal |
| Roller Frames - Each | 6.5 gal |
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
|---|
| Ripper Type | Fixed Parallelogram |
|---|---|
| Number of Pockets | 3 |
| Overall Beam Width | 87 in |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 20 in |
| Maximum Penetration | 20 in |
| Beam Cross Section | 216 x 254 mm 8.5 x 10 in |
| Weight - Each Additional Shank | 163 lb |
| Pry-Out Force | 20,137 lb |
| Maximum Penetration Force | 14,557 lb |
| Weight - With One Shank | 3,606 lb |
| Drum Diameter | 10 in |
|---|---|
| Drum Width | 13 in |
| Weight | 2,600 lb |
| Flange Diameter | 20 in |
| Oil Capacity | 17.8 gal |
| Winch and Bracket Length | 48 in |
| Winch Case - Width | 38 in |
| Increased Tractor Length - STD | 20 in |
| Drum Capacity - 22 mm (0.88 in) | 3,480 in |
| Drum Capacity - 29 mm (1.13 in) | 2,640 in |
| Ferrule Size (O.D. Length) | 54 x 67 mm 2.10 x 2.63 in |
| Increased Tractor Length - LGP | 16 in |
| Drum Capacity - 25 mm (1.0 in) | 2,640 in |
| Increased Tractor Length - XL/XW | 20 in |
| Ripper Cylinder Flow | 42.3 gal/min |
|---|---|
| Tilt Cylinder Flow | 21.1 gal/min |
Other crawler dozers in a similar weight class.