242B II

Specifications

75 data points

Operating Specifications specifications
Operating Weight	6,914 lb
Max Speed	6.8 mph
Fuel Capacity	15.3 gal
Hydraulic System Fluid Capacity	14.5 gal
Operating Voltage	12 V
Alternator Supplied Amperage	85 A
Engine Oil Fluid Capacity	2.6 gal
Cooling System Fluid Capacity	2.6 gal
Chain Box Fluid Capacity - each side	1.6 gal
Breakout Force - Tilt Cylinder	4,060 lb
Rated Operating Capacity	2,100 lb
Tipping Load	4,200 lb

Weights specifications
Operating Weight	6,914 lb

Hydraulic System specifications
Pump Flow Capacity	15.6 gal/min
Relief Valve Pressure	3,335 psi
Loader Hydraulic Pressure	3,335 psi
Loader Hydraulic Flow	15.6 gal/min
Hydraulic Power	30.4 hp
Maximum Loader Hydraulic Flow	26.0 gal/min
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow
Maximum Loader Hydraulic Pressure	3,335 psi

Dimensions specifications
Ground Clearance	7 in
Height - Top of Cab	78 in
Wheelbase	43 in
Width Over Tires	66 in
Reach at Max Lift and Dump	30 in
Length with Bucket on Ground	135 in
Length with Bucket	135 in
Clearance at Max Lift and Dump	89 in
Turning Radius from Center - inc bucket	87 in
Turning Radius from Center - machine rear	61 in
Length w/o Bucket	109 in
Length - without Bucket	109 in
Wheel Base	43 in
Bucket Pin Height - Maximum Lift	120 in
Clearance at Maximum Lift and Dump	88 in
Maximum Overall Height	155 in
Bucket Pin Height - Carry Position	12 in
Reach - Maximum Lift/Dump	30 in
Turn Radius from Center - Bucket	87 in
Turn Radius from Center - Coupler	57 in
Maximum Reach - With Arms Parallel	48 in
Turn Radius from Center - Rear	61 in
Maximum Dump Angle	50 °
Rack Back Angle - Maximum Height	87 °
Departure Angle	28 °
Vehicle Width over Tires	66 in
Bumper Overhang - Rear Axle	39 in
Bucket Pin Reach - Maximum Lift	11 in