CaterpillarCaterpillar
D6N XL
Crawler Dozer
62 specifications
1 / 5
Image 1 of 5
Specifications
83 data points
Operating Specifications
| Fuel Capacity | 126.5 gal |
|---|---|
| Cooling System Fluid Capacity | 20.4 gal |
| Final Drives Fluid Capacity | 3.4 gal |
| Engine Oil Capacity | 8.2 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 95 A |
Engine
| Displacement | 629 in³ |
|---|---|
| Power Measured @ | 2,100 rpm |
| Gross Power | 258.0 hp |
| Net Power | 240.0 hp |
| Number of Cylinders | 6 |
| Make | Cat |
| Bore | 5 in |
| Stroke | 6 in |
| Net Power - ISO 9249 | 240.0 hp |
| Net Power - SAE J1349 | 238.0 hp |
| Flywheel Power | 240.0 hp |
| Maximum Flywheel Power | 258.0 hp |
| Net Power - EU 80/1269 | 240.0 hp |
| Net Power - Caterpillar | 240.0 hp |
Hydraulic System
| Pump Flow Capacity | 47.6 gal/min |
|---|---|
| Relief Valve Pressure | 3,307 psi |
Dimensions
| Ground Clearance | 17 in |
|---|---|
| Height - Top of Cab | 133 in |
| Length of Track on Ground | 113 in |
| Width Over Tracks | 101 in |
| Length w/ Blade | 224 in |
| Length w/o Blade | 186 in |
| Track Gauge | 78 in |
| Length - Track on Ground | 113 in |
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 25 in |
Transmission
| Max Speed - Forward | 6.6 mph |
|---|---|
| Max Speed - Reverse | 8.5 mph |
| Transmission Type | Hydrostatic |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| 2 Forward | 3.8 mph |
| 3 Forward | 6.6 mph |
| 2 Reverse | 4.9 mph |
| 3 Reverse | 8.5 mph |
| 1 Forward | 2.2 mph |
| 1 Reverse | 2.9 mph |
Undercarriage
| Track Gauge | 78 in |
|---|---|
| Number of Track Rollers per Side | 7 |
| Number of Shoes per Side | 40 |
| Standard Shoe Size | 22 in |
| Ground Contact Area | 5,016 in³ |
| Track Pitch | 9 in |
| Ground Clearance | 17 in |
| Grouser Height | 3 in |
Service Refill Capacities
| Fuel Tank | 126.5 gal |
|---|---|
| Cooling System | 20.4 gal |
| Final Drive - Each | 3.4 gal |
| Engine Crankcase | 8.2 gal |
| Power Train | 47.0 gal |
| Pivot Shaft Compartment | 0.5 gal |
| Roller Frames - Each | 6.5 gal |
Standard Blade
| Width | 145 in |
|---|---|
| Height | 60 in |
| Capacity | 9.00 yd³ |
Ripper
| Ripper Type | Adjustable Parallelogram |
|---|---|
| Number of Pockets | 3 |
| Overall Beam Width | 87 in |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 30 in |
| Maximum Penetration | 29 in |
| Beam Cross Section | 343 x 279 mm 13.5 x 11 in |
| Weight - Each Additional Shank | 330 lb |
| Pry-Out Force | 38,513 lb |
| Maximum Penetration Force | 19,100 lb |
| Weight - With One Shank | 7,431 lb |
Winch
| Drum Diameter | 13 in |
|---|---|
| Drum Width | 13 in |
| Weight | 4,176 lb |
| Flange Diameter | 24 in |
| Oil Capacity | 4.0 gal |
| Winch and Bracket Length | 58 in |
| Winch Case - Width | 46 in |
| Increased Tractor Length - STD | 29 in |
| Drum Capacity - 29 mm (1.13 in) | 3,312 in |
| Ferrule Size (O.D. Length) | 2.38 in x 2.56 in / 60 mm x 65 mm |
| Increased Tractor Length - LGP | 29 in |
Hydraulic Controls - Pump
| Ripper Cylinder Flow | 47.6 gal/min |
|---|---|
| Tilt Cylinder Flow | 21.1 gal/min |
Comparable machines
Other crawler dozers in a similar weight class.