Wacker Neuson
280
Wheel Loader
26 specifications

49 data points
| Tire Size | 365/70R18 |
|---|---|
| Static Tipping Weight | 8,457 lb |
| Operating Voltage | 12 V |
| Turning Radius | 138 in |
| Engine Oil Fluid Capacity | 9.0 gal |
| Rear Axle Oscillation | 20 ° |
| Alternator Supplied Amperage | 65 A |
| Front Axle/Diff Fluid Capacity | 4.2 gal |
| Rear Axle/Diff Fluid Capacity | 4.3 gal |
| Rated Bucket Capacity | 0.99 yd³ |
| Engine Oil Capacity | 2.3 gal |
| Static Tipping Load - Bucket | 8,457 lb |
| Front Diff Fluid Capacity | 1.1 gal |
| Rear Diff Fluid Capacity | 1.1 gal |
| Static Tipping Load - Forks | 6,405 lb |
| Power Measured @ | 2,600 rpm |
|---|---|
| Gross Power | 64.0 hp |
| Number of Cylinders | 4 |
| Aspiration | turbocharged |
| Torque Measured @ | 1,600 rpm |
| Max Torque | 163 lb-ft |
| Make | John Deere |
| Torque Rise | 47.3 % |
| Operating Weight | 11,552 lb |
|---|
| Raise Time | 4.9 s |
|---|---|
| Lower Time | 4.0 s |
| Dump Time | 1.4 s |
| Relief Valve Setting | 3,190 psi |
| Ground Clearance | 12 in |
|---|---|
| Height - Top of Cab | 108 in |
| Reach at Max Lift and Dump | 32 in |
| Length with Bucket on Ground | 209 in |
| Hinge Pin - Max Height | 126 in |
| Reach at Max Height and Dump | 47 in |
| Dump Clearance at Max Lift | 101 in |
| Length w/ Bucket on Ground | 209 in |
| Max Lift Height | 120 in |
| Fork Tine Length | 48 in |
| Length with out Forks on Ground | 229 in |
| Max Speed - Forward | 18.6 mph |
|---|---|
| Max Speed - Reverse | 18.6 mph |
| Transmission Type | hydrostatic |
| Number of Forward Gears | 2 |
| Number of Reverse Gears | 2 |
| Bucket Capacity - heaped | 0.99 yd³ |
|---|---|
| Bucket Capacity - struck | 0.90 yd³ |
| Dump Clearance at Max Raise | 101 in |
| Breakout Force | 10,792 lb |
| Bucket Width | 898 in |
Other wheel loaders in a similar weight class.