Mecalac
Case
21D
Wheel Loader
43 specifications
1 / 5
Image 1 of 5
Specifications
34 data points
Operating Specifications
| Operating Weight | 11,927 lb |
|---|---|
| Fuel Capacity | 23.0 gal |
| Tire Size | 365/70 R 18 |
| Hydraulic System Fluid Capacity | 15.9 gal |
| Operating Voltage | 12 V |
| Turning Radius | 146 in |
| Rear Axle Oscillation | 11 ° |
| Alternator Supplied Amperage | 95 A |
| Front Axle/Diff Fluid Capacity | 1.6 gal |
| Rear Axle/Diff Fluid Capacity | 1.8 gal |
| Steering Angle | 40 ° |
Engine
| Engine Model | Deutz TD 2.9 L4 |
|---|---|
| Power Measured @ | 2,300 rpm |
| Net Power | 75.0 hp |
| Aspiration | Low-noise water-cooled turbo diesel engine |
| Torque Measured @ | 1,800 rpm |
| Battery | 100 Ah |
Hydraulic System
| Pump Flow Capacity | 16.4 gal/min |
|---|---|
| Pump Type | Single circuit hydraulics with central gear pump |
Dimensions
| Ground Clearance | 17 in |
|---|---|
| Height - Top of Cab | 97 in |
| Wheelbase | 80 in |
| Width Over Tires | 70 in |
| Reach at Max Lift and Dump | 33 in |
| Length with Bucket on Ground | 211 in |
| Hinge Pin - Max Height | 130 in |
Transmission
| Max Speed - Forward | 12.5 mph |
|---|
Bucket
| Bucket Capacity - heaped | 2.11 yd³ |
|---|---|
| Breakout Force | — |
| Tipping load Standard bucket | 9,039 lb |
| Dumping angle, top | 45 ° |
| Lifting force | 4300 newton |
| Payload on forks, max. turned, frontal | 5,754 lb |
| Thrust force | 4100 newton |
Comparable machines
Other wheel loaders in a similar weight class.
